Paper Source Setting:
Paper Setup:
Select the paper size and paper type you loaded in the paper source. You can make Favorite
Paper Settings in paper size and paper type. Select
to return to the last settings you made.
Paper Conguration:
Select On to display the paper settings screen automatically by referring to Settings > Printer
Settings > Paper Source Setting > Paper Setup when paper is loaded in the paper source. If
you disable this feature, you cannot print from an iPhone or iPad using AirPrint
Quiet Mode:
Select On to reduce noise during printing, however, this may lower the print speed. Depending on
the paper type and print quality settings you selected, there may be no
dierence
in the printer's noise
level.
Ink Drying Time:
Select the ink drying time you want to use when performing 2-sided printing. e printer prints the
other side aer printing one side. If your printout is smeared, increase the time setting.
Bidirectional:
Select On to change the print direction; Prints while the print head moves to the le and to the right.
If vertical or horizontal ruled lines on your printout look blurred or misaligned, disabling this feature
may solve the problem; however, doing so may reduce print speed.
PC Connection via USB:
Select Enable to allow a computer to access the printer when connected by USB. When Disable is
selected, printing and scanning that is not sent over a network connection is restricted.
Clear All Settings
Resets the Printer Settings to their defaults.
Menu Options for Network Settings
Select the menus on the control panel as described below.
Settings > Network Settings
Wi-Fi Setup:
Set up or change wireless network settings. Choose the connection method from following and then
follow the instructions on the control panel.
❏ Wi-Fi (Recommended):
❏ Wi- F i D i re c t
Network Status:
Displays the current network connections.
❏ Wi- F i S t a tu s
User's Guide
Preparing the Printer
54
To Next Page
Loading...
Need help?
General
