Epson XP-5100 Series - Scanning to a Computer (WSD); Setting Up a WSD Port

❏ Original Orientation:
Select the orientation of the original.
Contrast:
Select the contrast of the scanned image.
Clear All Settings:
Resets the scan settings to their defaults.
Scanning to a Computer (WSD)
Note:
❏  i s f e at u re i s o n l y av a i l abl e fo r com p ut e rs r u nn i n g Wi nd ow s 1 0 / Wi n d o w s 8 . 1 / Win d o w s 8 / Wi n d ow s 7 / Wi n d o w s Vi st a .
❏ If you are using Windows 7/Windows Vista, you need to setup your computer in advance using this feature.
1. Place the originals.
2. Select Scan on the home screen.
To select an item, move the focus to the item using the
u d l r buttons, and then press the OK button.
3. Select Computer (WSD).
4. Select a computer.
5. Press the
x button.
Setting Up a WSD Port
is
section explains how to set up a WSD port for Windows 7/Windows Vista.
Note:
For Windows 10/Windows 8.1/Windows 8, the WSD port is set up automatically.
e following is necessary to set up a WSD port.
❏ e printer and the computer are connected to the network.
❏ e printer driver is installed on the computer.
User's Guide
Scanning
118