Epygi QX series Administrator's Guide

QX5
QXFXO4/QXISDN4/QXE1T1/QXFXS24; (SW Version 6.0.x) 119
QXFXO4/QXISDN4/QXE1T1/QXFXS24 Manual II: Administrator’s Guide
The following functional buttons are available on this page:
The Change Password functional button is used to change the
password of the Administrator and Local Administrator user’s
account. Select one of the available users in the table by toggling
the corresponding checkbox and press Change Password to
open the corresponding page.
Fig.II- 187: User Rights Management - Users page
For
Administrator
or
Local Administrator
account the
Change Password
page contains two parts - one for
GUI Access
Password, the other one for Phone Access Password.
The GUI Access Password offers the following components:
• The Old Password text field is only present when
modifying the Administrator account password and
requires the current password of the Administrator. An
error message prevents entering the wrong password.
• The New Password text field requires a new password
for the Administrator or Local Administrator.
• Reentering the new password in the Confirm New
Password text field will confirm the new password. The
New Password field is checked against its strength and
you may see how strong is your inserted password right
below that field.
Fig.II- 188: Change Password page
Please Note: The password can consist of numeric values and symbols. Up to twenty (0-20) digits and symbols are allowed.
The
Phone Access Password
offers the following components:
• The Old Password text field is present when modifying
the Administrator account password and requires the
current password of the Administrator. An error
message prevents entering the wrong password.
• The New Password text field requires a new password
for the Administrator or Local Administrator.
• Reentering the new password in the Confirm New
Password text field will confirm the new password. The
New Password field is checked against its strength and
you may see how strong is your inserted password right
below that field.
Fig.II- 189: Change Password page
Please Note: The password can consist of numeric values only. Up to twenty (0-20) digits are allowed. A corresponding warning appears if any other
symbols are inserted.
The Enable User and Disabled User functional buttons are used to enable or disable the Local Administrator’s account.
Attention: It is highly recommended to define a proper and non-empty password on this page if the extension is being used for the Call Relay service from
the QX's Auto Attendant.
Roles
The
Roles
page contains a table where the Local Administrator
and Extensions users are listed. This page allows you to set the
permissions to the GUI pages for each user in the table.
The Edit functional button leads to the Change Access Rights
page where a list of user specific GUI pages is displayed. Select
the user in the table and press Edit to manage the permission for
the corresponding user.
Fig.II- 190: User Rights Management – Roles page

Epygi QX series Specifications

General

Brand	Epygi
Model	QX series
Category	PBX
Language	English