Epygi QX50 User Manual

QX50/QX200/QX2000; (SW Version 6.0.x) 167
QX50/QX200/QX2000 Manual II: Administrator’s Guide
configuration.
Please Note:
Unlike the factory default settings restore procedure initialized from the
Reset
button on the QX IP PBX board, this link will keep the
following data:
• Call History
• Transfer Statistics
• System Events
• Feature Keys
• Device Registration state
Automatic Backup
The
Automatic Backup
page allows you to enable the automatic
backup of the system configuration and the voice data on the QX
IP PBX. With this service, QX IP PBX will automatically backup
the system configuration and the voice data and store it in the
specified location.
This page contains the following components:
The Enable Automatic Backup checkbox enables automatic
backup mechanism on the QX IP PBX.
The following group of manipulation radio buttons allows you to
select whether the backup files will be delivered by email or
stored in some location:
• The Send via Email radio button is used to send the
automatically backed up files via email. The selection
enables Email Address text field that requires the email
address of the administrating person to receive the
automatically backup files.
• The Send to Server radio button is used to store the
automatically backup files on a remote server. This
selection enables the following fields to be inserted:
Fig.II- 279: Automatic Backup page
The Server Name requires the IP address or the host name of the remote server.
The Server Port requires the port number of the remote server.
The Path on Server requires the path on the server to store the backup files in.
The Send Method manipulation radio buttons allow you to select the remote server type: TFTP or FTP. In case of FTP selection, the authentication
username and the password need to be inserted. In case these fields are left empty, anonymous authentication will be used.
The Backup Interval Selection drop down lists is used to select the frequency and the time when the automatic backup of the QX IP PBX's system
configuration and the voice data will take place.
Backup Now button is used to perform a manually immediate backup of the system configuration and the voice data.
Download Legible Configuration
The Legible Configuration Management page is used to manually manage the configuration on the QX IP PBX. This will allow you to download a piece of
configuration from the QX IP PBX in the way of legible file, to make necessary changes in that file and to upload it back to the same or different QX IP
PBX(s). With this service, some pieces of configuration (like extension settings, NAT settings, etc.) of one QX IP PBX can be used on another QX IP PBX. This
also helps to apply the same group of settings to the several instances (for example, to apply the same SIP settings to multiple extensions on the QX IP
PBX) on the same or different QX IP PBXs avoiding manual configuration of each of those instances (i.e. extension) from the web management on each of
the QX IP PBXs. The QX IP PBX reseller, distributor, ISP or carrier usually uses this service.
The manipulation radio buttons are used to select between particular page or a named group of pages for which the legible configuration file will be
generated.
• The Single Page selection allows you to choose a certain page from the list of QX IP PBX’s Web management pages for which the legible
configuration can be manually managed. For example, selecting "RTP Settings" will generate a legible configuration file with parameters present
on the RTP Settings page.
• The Group of web pages selection allows you to choose among the four predefined groups: Internet Connection Settings, LAN Configuration
Settings, Telephony General Settings and Extension Settings. Each of these groups refer to all pages characterized by the selected criteria, e.g.
Internet Connection Settings group contains all parameters on the pages related to the networking and WAN configuration.

Epygi QX50 Specifications

General

Brand	Epygi
Model	QX50
Category	Network Hardware
Language	English