EasyManua.ls Logo

ERA Invincible - Page 39

ERA Invincible
62 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
33
Built-in Siren
The built-in siren is inside the Control Panel.
Turn On/Off the built-in Control Panel Siren
Log into the menu, press or , choose “System Settings”, press .[ ] [ ] [Enter]
Press or , choose “Siren Setup, press .[ ] [ ] [Enter]
Press or , choose “Built-in Siren”, press .[ ] [ ] [Enter]
Press or , choose Siren On/Off, press .[ ] [ ] [Enter]
Press or , choose Off/Low/High, press [ ] [ ] [Enter].
Choose "Low" or "High" to adjust the volume; "Off" is to turn off the built-in siren.
The default setting is "Low".
Turn On/Off Arm/Disarm Beep for Built-in Siren
Log into the menu, press or , choose “System Settings”, press .[ ] [ ] [Enter]
Press or , choose “Siren Setup, press .[ ] [ ] [Enter]
Press or , choose “Built-in Siren”, press .[ ] [ ] [Enter]
Press or , choose “Arm/Disarm Beep, press .[ ] [ ] [Enter]
Press or , choose “On” or “Off, press [ ] [ ] [Enter].
“On” is to turn on arm/disarm beep for built-in siren; “Off” is to turn off arm/disarm beep
for built-in siren. The default setting is “On”.
Set Ringing Time for All Sirens
Log into the menu, press or , choose “System Settings”, press .[ ] [ ] [Enter]
Press or , choose “Siren Setup, press .[ ]
[ ] [Enter]
Press or , choose “Siren Alert Time”, press .[ ] [ ] [Enter]
Input the ringing time, press .[Enter]
The Siren ringing time is calculated as seconds, the default setting is 300 seconds. If 0
second is set, the siren will not ring.
1
2
3
4
5
1
2
3
4
1
2
3
4
5

Related product manuals