ERA Invincible - System Settings

27
1
2
3
4
Date Format
Log into the menu, press or , choose “System Settings”, press .[ ] [ ] [Enter]
Press or , choose “Date and Time”, press .[ ] [ ] [Enter]
Press or , choose “Date Format”, press .[ ] [ ] [Enter]
Press or , choose format, press .[ ] [ ] [Enter]
Time
The default time format is set to 24 hours as standard.
Log into the menu, press or , choose “System Settings”, press .[ ] [ ] [Enter]
Press or , choose “Date and Time”, press .[ ] [ ] [Enter]
Press or , choose “Time”, press .[ ] [ ] [Enter]
Input current time, press .[Enter]
Entry and Exit Delay
If not using the Remote Control when entering/exiting, an entry/exit delay can be set
that will give the user sufficient time to enter/exit the property, without the system
alarming/arming during the given period of time. The system will arm automatically
after the exit delay period set has expired.
Entry Delay
The delay time can be set to suit the user(s) preference. During this period the Sensors
will not trigger an alarm status.
Log into the menu, press or , choose “System Settings”, press . [ ] [ ] [Enter]
Press or , choose “Entry Exit Delay”, press .[ ] [ ] [Enter]
Press or , choose “Entry Delay”, press .[ ] [ ] [Enter]
1
2
3
4
1
2
3
1
2
3
3. System Settings
Date and Time
Date
Log into the menu, press or , choose “System Settings”, press .[ ] [ ] [Enter]
Press or , choose “Date and Time”, press .[ ] [ ] [Enter]
Press or , choose “Date”, press .[ ] [ ] [Enter]
Input date, press .[Enter]
4