How to use this device
10/2020 1020217-00A Operating instructions – 55/96
WARNING!
Injuries and damage due to improper maintenance!
If the maintenance intervals for the UV lamps are exceeded
or incompatible UV lamps are installed, the share of harmful
UV radiation may increase. Sunburn and other skin damage
may result.
Improper maintenance can cause the device to be dama
ed
or to become unusable.
– Always comply with the specified maintenance inter-
vals, see chapter 12.16.2 Maintenance plan.
– Follow the cleaning/disinfection instructions.
Danger of burns from hot lamps and device parts!
If the tannin
device was operated before bein
switched off
and opened, lamps and housing parts may be hot.
– Before replacing lamps or other spare parts, wait until
lamps and metal parts of the device have cooled down
sufficiently.
Danger of squeezing!
When opening and closing the panels and acrylics, you can
squeeze your fingers.
Maintenance and care play a major role in deciding the devices performance
and appearance over its useful life. Diligent compliance at the specified inter-
vals is absolutely necessary to ensure the proper operation of your device.
The current operating hours of the parts requiring maintenance can be dis-
played in the Presetting mode – see separate document 'Professional Setup
Manager' #1014640-.. in the Technical Documentation folder.
Please note that the device must be inspected regularly by a JK authorized
representative every 12 months (from date of installation) to maintain its
proper condition!
NOTE:
Please note, this device must be inspected a minimum of
every 12 months from the original date of sale/installation in
order to ensure all performance and safety requirements
continue to be fulfilled!
Once the age of the device reaches ten (10) years from the date of manufac-
ture, its condition must be assessed by a (Level 4) JK Factory Certified Tech-
nician before use of the device can be continued.
Failure to have this device assessment performed, may result in personal
injury or property damage.
Any liability is excluded if use of the device continues ten (10) years after the
date of manufacture, without the "condition assessment" having been per-
formed.
To Next Page
Loading...
