How to use this device
10/2020 1020217-00A Operating instructions – 73/96
12.16.9 Cleaning or replacing the lamps in the
shoulder tanner
WARNING!
Danger of burns from hot lamps and device parts!
If the tannin
device was operated before bein
switched off
and opened, lamps and housing parts may be hot.
– Before replacing lamps or other spare parts, wait until
lamps and metal parts of the device have cooled down
sufficiently.
– Opening the bed base: see page 65.
– Remove the screws and then remove the lamp cover.
Replacing lamps: see page 67.
Replacing starters: see page 68.
The assembly is the same process in reverse order.
When assembling the device please note:
– The bed base must lock with an audible click when closed.
12.16.10 Cleaning or replacing the interior lights
Not applicable for this device.
12.16.11 Cleaning or replacing the canopy accent
lighting
Not applicable for this device.
To Next Page
Loading...
