JK-Products, Inc. – Limited Warranty
92/96
You must comply to the instructions and warnings under chapter:
4.1 Intended use
5.1 Prohibited usage
6. What you must do to avoid serious harm
Any other use shall be considered improper. The manufacturer cannot be
held liable for damage or injuries resulting from misuse. The operator bears
the sole risk for this.
The proper use also includes compliance with the manufacturer`s instructions,
operating and maintenance conditions. This device may only be operated,
maintained and repaired by persons familiar with these tasks and who are
aware of the dangers involved.
17.2.2 Labor Warranty Claim/Credit Procedures
Global Service USA furnishes labor without charge for a period of 90 days
from date of purchase. All labor and related charges must be authorized by
Global Service USA prior to start of repairs, and must coincide with Global
Service USA established rates and time allotment policy.
Please contact our Service Department for authorization and billing proce-
dures.
17.2.3 Quality inspection and acceptance form
The form can be found in the separate document ‘Quality inspection and
acceptance form’ (#1014113-..) which is provided in the Technical Documen-
tation folder.
To Next Page
Loading...
Need help?
General
