ppendi
10/2020 1020217-00A Operating instructions – 85/96
16 Appendix
16.1 Model-No.: JK 155…: EMC information
16.1.1 Table 201: Guidelines and manufacturer's
declaration – Electromagnetic emissions
The Tanning system has been designed for use in the electromagnetic envi-
ronment specified below. The device operator must ensure that it is used in
such an environment.
Emission measurements Conformity Electromagnetic environment – Guidelines
HF emissions as per CISPR 11 Group 1 Model-No.: JK 155… uses HF power mostly for internal functions and
Bluetooth®. Therefore the HF emissions are very low and it is highly
unlikely that it will cause any interference to adjacent electronic equip-
ment.
HF emissions as per CISPR 11 Class B Model-No.: JK 155 / 46-3 has been designed for use in all devices, in-
cludin
those in residential areas, and it has been determined that it can
be used for residential purposes as soon as it is connected up to a pub-
lic mains supply that also supplies buildings.
To Next Page
Loading...
