How to use this device
10/2020 1020217-00A Operating instructions – 69/96
High pressure lamps and filter panels
WARNING!
Danger of burns from hot lamps and device parts!
If the tannin
device was operated before bein
switched off
and opened, lamps and housing parts may be hot.
– Before replacing lamps or other spare parts, wait until
lamps and metal parts of the device have cooled down
sufficiently.
High-pressure lamps are used in the facial tanners.
WARNING!
Fire hazard due to overheated lamps!
Non-approved high pressure lamps can explode. Hot lamp
components can set other parts on fire. People can be killed
or severely injured due to smoke inhalation and fire.
– Only fit the high pressure lamps specified by the manu-
facturer.
– Clean the inside of the device regularly. Dust particles
are flammable!
– Release the clamping holder.
– Lift the filter panel, pull it out of the guide and remove it.
– Unplug the lamps.
– Clean the reflector.
To Next Page
Loading...
