ESAB EMP 320ic - 2 Introduction; Overview; Equipment

2 INTRODUCTION
0463 605 001
- 8 -
© ESAB AB 2018
2 INTRODUCTION
2.1 Overview
The ESAB, EMP 255ic and EMP 320ic product family is a new generation of multi-process
(MIG, TIG, MMA) welding power sources designed to match the needs of the user across a
variety of welding applications.
The EMP features a 11 cm (4.3 in.) color TFT (Thin Film Transistor) user interface (UI)
display which provides quick and easy selection of weld process and parameters, suitable for
both newly trained and intermediate-level users. For more advanced users, any number of
functions could be introduced and customized to give maximum flexibility.
ESAB accessories for the product can be found in the "ACCESSORIES" chapter of
this manual.
2.2 Equipment
The power source is supplied with:
• USB stick including instruction manual
• Safety manual
• 3 m (9.8 ft) mains cable with CEE 16A plug
• Gas hose for with Quick Connector
• Return cable with ground clamp, 4.5 m, 300A
• Guide tubes: 0.8 mm (0.030 in) – 1.2 mm (0.045 in)
• Drive rolls
○ 1.0 mm (0.040 in)/1.2 mm (0.045 in)
○ 0.8 mm (0.030 in)/1.0 mm (0.040 in)
• Thickness gauge tool