5 OPERATION
0463 605 001
- 21 -
© ESAB AB 2018
A. Bobbin locking nut
NOTE!
The larger bobbin may come in the wire form shown in the illustration or may be
molded plastic form. Either mounts the same way as shown.
5.8 Removing/installing wire
NOTE!
If installing aluminum wire, see "Welding with aluminum wire" section.
The EMP 255ic or the EMP 320ic will handle bobbin sizes of 100 mm (4 in.), 200 mm (8 in.)
and 300 mm (12 in.). See "TECHNICAL DATA" chapter for suitable wire dimensions for each
wire type.
To Next Page
