-- 4 8 --
fzb2d3ea
12.6 Password
Product code A2TFH
Weld process SAW
POWER SOURCE MENU
Gas preflow (s) 1--99
Gas postflow (s) 1--99
Password XXXXX
Cable length (m) X
Cablearea(mm2) X
Access to the PRESET SYSTEM MENU can be protected by entering a password in
the Passwo rd field.
The password must consist of not more than five numerals, XXXXX.
If no password is required, enter the numerical value 0. If the password consists of
more than one numeral, press
a few times until there is only one 0.
The password that has been entered can be shown in the MAIN MENU display by
entering +
For example if the password is
12345 the display will show:
GB
To Next Page
Loading...