model of the IP phone you are using, for example, if the model is ES620,
the file name is “K000600.cfg”);
*Named rule of the file:
K00600.cfg: for ES620, ES610 and DS622;
K00400.cfg: for ES410 and DS412;
K00300.cfg: for ES310 and DS312;
K00200.cfg: for ES210 and DS212.
2. Open the notepad file “K000X00.cfg” and write the new kernel name in it,
for example,
K_uImage_600.bin_version2.1.6: for ES620, ES610 and DS622;
K_uImage_400.bin_version2.1.6: for ES410 and DS412;
K_uImage_300.bin_version2.1.6: for ES310 and DS312;
K_uImage_200.bin_version2.1.6: for ES210 and DS212
Write the new version you want to upgrade and save it on your
provisioning server.
*Please note that if the version is not older than (and same as) the one on your
phone, auto-provision of your kernel would be not available.
3. After it, upload the new kernel to the TFTP/HTTP/HTTPS/FTP provisioning
server and complete the pre-configuration steps.
Configuration files on TFTP/HTTP/HTTPS/FTP Server
Name of configuration file:
The configuration file on the provisioning server is named as the MAC address
of IP phone itself. Escene’s IP phones support two different configuration files
for auto-provision:
1. Normal Configuration file:
Normal Configuration file is the configuration file of your Escene IP phone. You
can download it from your phone (You can see the following chapter to see how
to download a configuration file from Escene IP hone) and modify by yourself.
If the IP phone’s MAC address is 00:11:22:33:44:55, the normal configuration
file of it should be
001122334455.xml
.
2. Broadsoft Configuration files:
Broadsoft Configuration files support the format of Broadsoft IP-PBX. However,
you can use them for provisioning. There are two files should be set on your
provisioning server, they are also named by the MAC address of your phone
1)
001122334455.cfg
: a configuration file for system settings, for
example, network, audio and so on.
2)
001122334455.txt
: a configuration file for SIP accounts.
Download a configuration file from your phone:
You can download a configuration file from your phone by HTTP as follow:
To Next Page
Loading...
