5 Transport, storage and disposal
5.1 Transport
Devices are packed in a carton box; it is wrapped in a polyethylene. The box is affixed to
pallets with the special straps.
If there is any damage, the device and its packaging should be inspected visually. After the
inspection, MAW, Multi-zone ART Workstation
®
is prepared to be transported.
The following labels should be glued on the box:
• Label with a marked packing date
• Label with the product name and serial number
• Label with the country of origin
• Warning labels “Fragile” and “Handle with care”
5.2 Storage
The device may only be used under the following conditions:
• The unit may be stored for one year
• If stored longer than one year, the unit must be returned to the manufacturer for a
new release test
• Store within the following temperature limits: -20.0
o
C and + 50.0
o
C
• Keep away from direct sunlight
• Cautiously inspect the accompanying documents for important safety-related infor-
mation such as warnings and precautions that cannot, for a variety of reasons, be
presented on the device itself
• Do not use if the packing material is damaged
• Keep dry
5.3 Disposal
The unit contains reusable materials. All components (with the exception of HEPA filter)
may be discarded after having been cleaned and disinfected.
Please note that HEPA filters must be discarded according to the applicable national regula-
tions in terms of special solid waste.
The device may have been used for treating and processing infectious sub-
stances. Therefore, the device and device components may have been contaminated.
Prior to disposal, all device components must be decontaminated.
To Next Page
Loading...