Acceptance Inspection
The robot arm and its controller are packed in two separate cartons. Save the original
packing materials and shipping carton. You may need them later for shipment or storage.
After removing the robot arm from its shipping cartons, examine it for signs of shipping
damage. If any damage is evident, do not install or operate the system. Notify your
freight carrier and begin appropriate claims procedures.
The standard SCORBOT-ER 4pc package includes the following items:
•
SCORBOT-ER 4pc Robot arm
•
Power cable 100/110/220VAC
•
3 bolts for mounting robot; set of hex wrenches
•
SCORBOT-ER 4pc User’s Manual
Refer to the Controller-PC User’s Manual for information about the control unit’s
standard and optional components.
Make sure you have received all the items listed on the shipment’s packing list. If
anything is missing, contact your supplier.
SCORBOT-ER 4pc 2 User’s Manual
9810
To Next Page
Loading...