ESI 600 - Caller ID Key Functionality

User’s Guide Special keys
F.15
Caller ID key (Code 574)
Notes: Not available on a 12-Key Feature Phone or ESI Cordless Handset.
This works only if you are receiving Caller ID service from your provider. Consult your Administrator,
if needed.
Press this programmable feature key to see the stored Caller ID records for your extension’s 25 most
recently received calls. Use the scroll keys ( / ) to view Caller ID information from different calls. (The
system stores Caller ID records for only extensions which have a Caller ID key assigned; so, when you
first assign the key, you’ll have no previous records through which to scroll.)
The phone display will also indicate each call’s classification as shown in this chart; also, if this is the
first time you’re seeing this particular call’s record,

appears to the left of this indication.
Classification
On 48-Key Phone,
third line
On 24-Key Phone,
second line
Answered by the station
ANS A
Missed call (abandoned call)
MISS M
Went to your voice mailbox
VM V
Answered by “other” means (call-forwarding, use of someone
else’s PICKUP key, etc.)
RE R
New record


While a record is on the display, you may do the following:
• To dial the caller displayed, press REDIAL.
• To view the telephone number (rather than the name), press 2.
1
• To delete a record, press 7 while the record is on the display.
• To store the record in your Personal Dex, press ESI-DEX.
To finish, press the Caller ID key again (or press RELEASE).
(Continued)
1
Not applicable to a 48-Key Feature Phone, which shows both the number and (if included in the Caller ID record) the name.