EasyManua.ls Logo

ESI 600 - Analog Voice Mail Retrieval Key Functions

ESI 600
104 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Analog stations User’s Guide
J.6
Functions available during analog station voice mail message retrieval
Note: Functions tinted light gray, below, either change or are not available when you’re using an ESI Feature
Phone (see page D.5).
Key Function Description
1 Pause Pauses for one minute or until 1 is pressed again.
2 Hear time/date Pauses the message, plays the time/date of when the
message was left and resumes.
3 Reply Replies to the originator of a message (if from a user in the
system). Record your reply at the tone; press 1 to stop. You
will be returned to your mailbox and the original message.
4 Back up (rewind) When pressed during message playback, rewinds 4 seconds
for each key press. If pressed after the message has finished,
it returns you to the beginning of the message.
5 Access user
programming
Accesses user programming menu.
6 Move Moves a copy of the message to another
user’s mailbox.
To move the message without an introduction,
press 6 when prompted.
To add an introduction, press 1 when prompted. When you’ve
finished your recording, press 1 to stop; You will be returned
to the original message in your mailbox.
7 Delete Deletes the message from the mailbox
(see “Message Recycle Bin,” page D.9).
8 Main greeting Goes to the main greeting
(if your system is using the built-in auto attendant).
9 Save Saves the message (it will be played as an old message the
next time messages are picked up).
9 9 Save as new Skips over a new message and leaves it as a new message
(i.e., it will be played as a new message the next time you
pick up messages). You must press the 9 key twice within two
seconds.
0 Operator Transfers you to the operator.
# To other mailbox To leave a message in another user’s mailbox.
To disconnect Always press
before hanging up (if you press it during
playback of a message, the message and any other unsaved
messages will be saved).
Retrieving messages from another user’s ESI Feature Phone
Press VOICE MAIL,
, and dial your extension number. Follow the procedures described previously
(see page J.5).

Table of Contents

Related product manuals