About this manual
This manual describes the following information required for designing and maintaining ETS series servo drives.
•Specification of the servo drives and servomotors.
•Procedures for installing the servo drives and servomotors.
•Procedures for wiring the servo drives and servomotors.
•Procedures for operating of the servo drives.
•Procedures for using the panel operator.
•Communication protocols.
•Ratings and characteristics.
Intended Audience:
•Those designing ETS series servo drive systems.
•Those installing or wiring ETS series servo drives.
•Those performing trial operation or adjustments of ETS series servo drives.
•Those maintaining or inspecting ETS series servo drives.
To Next Page
Loading...
