Estun ETS Series - Chapter 1; Checking Products and Parts Names; Checking Products on Delivery; Servomotor

ETS Series AC Servo User's Manual
- 7 -
Chapter 1
Checking Products and Parts Names
1.1 Checking Products on Delivery
If any of the above items are faulty or incorrect, contact your ESTUN representative or the dealer from whom you
purchased the products.
1.1.1 Servomotor
 Servomotor Model Designation
EMJ– 08 A P B 1 1 -WR
ESTUN Servomotor
【1+2】
【3】
【4】
【5】
【6】
【7】
【8+9】
EMJ Model
【1+2】
Rated Output
【4】Encoder
【7】Option
Code
Spec.
Code
Spec.
Code
Spec.
A5
0.05kW
P
Incremental Wire-saving Type：
2500P/R
1
None
01
0.1kW
F
Incremental encoder：1048576P/R
2
With oil seal
02
0.2kW
S
Absolute encoder：131072P/R
3
With brake (DC24V)
04
0.4kW
【5】Designing Sequence
4
With oil seal and brake(DC24V)
带制动器(DC24V)
08
0.75kW
Code
Spec.
【8+9】Connector
10
1.0kW
A
Designing sequence A
Code
Spec.
B
Designing sequence B
Standard connector
WR
Water proof connector (Incremental
Wire-saving Type)
【3】Voltage
【6】Shaft End
Code
Spec.
Code
Spec.
A
200VAC
200V
1
Straigt without key （Standard）
2
Straigt with key and tap
Check Items
Comments
Are the delivered products theones that
were ordered?
Check the model numbers marked on the nameplate on
theservomotor and servo drive.
Is there any damage?
Check the overall appearance, and check for damage or scratches
that may have occurred during shipping.
Does the servomotor shaft rotatesmoothly?
If the servomotor shaft can be easily rotated by hand, then the motor
is working normally. However, if a brake is installed on the
servomotor, then it cannot be turned by hand.