back angle
Tilt
Push handle/Bow handle
Install the push handles/bow handle by loosening the handle and
pushing in the locking pins on the push handle. Note! push handle
with symbol for back angle must be installed on the left side, push
handle with symbol for tilt must be installed on the right side.
Fasten the handle.
Make sure knobs are securely tightened.
This is especially important when lifting
the wheelchair with the user in.
Ensure that the push handle locking pins
are secured in the push handle attachment.
5. Installation upon delivery
Head support
Never lift the chair by the head support.
To Next Page
Loading...
