Etac Prio - 10. Technical Data; Product Specifications and Ratings

50
Etac / Prio / www.etac.com
* The seat depth is measured from the front of the seat cushion to the middle of the back cushion.
** With arm supports, elevating leg supports, calf supports, rear wheels and anti-tips.
*** Without arm supports, head support, seat cushion, elevating leg supports, calf supports, rear wheels.
Max. incline
sideways
>20°
Max. incline
down
>20°
Type of chair Art. no. Total width Seat height Seat depth*
Effective
seat width
Transport
width
Weight**
Transport
weight***
Max.
user weight
40 cm 13420305 59 cm 38-52.5 cm 39-51 cm 40 cm 56 cm 33.5 22.9 135 kg
45 cm 13420309 64 cm 38-52.5 cm 39-51 cm 45 cm 61 cm 33.8 23.2 135 kg
50 cm 13420313 69 cm 38-52.5 cm 39-51 cm 50 cm 66 cm 34.1 23.5 135 kg
55 cm 13420317 74 cm 38-52.5 cm 39-51 cm 55 cm 71 cm 34.4 23.8 135 kg
Total length Folded length Seat angle Back angling
Back support
height
Handrim size
Leg support
length
101.5 cm 86.5 cm +3° — -20° 0° — -30° 55-70 cm 44.5-52.5 cm 33-61 cm
10. Technical data
Chair with electrical back and seat recline function
Operating environment
Long-term/short-term storage and transportation Operation
Temperature -10 - +40 +5 - +30
Relative air humidity 20 - 90%
Atmospheric pressure 700 - 1060 hPa
If the chair has been stored at a low temperature, it must be adapted to the operating conditions before use.
Electrical drive system
Supply voltage 100 - 240 VAC, 50/60 Hz (-15% +10%)
Maximum input current 3.9 A
Intermittent (periodic motor use) 5% 1 min constant use 19 min standby
Nominal voltage 25.9 V DC
Protection class
IPX6
The part in contact with the patient meets the requirements for protection against electric shocks in
IEC60601-1.
Degree of protection Class 2
Battery type Lithium ion
Complete information and user instructions for electrical components is available at www.linak.com, or contact your retailer or technical aids centre.
This product has been tested and complies with the EMC limit values
given in IEC 60601-1-2 for class B equipment.
This product has a very low radiation and should not interfere with
other equipment.
Electromagnetic compatibility (EMC)