Back support upholstery
The back support upholstery is adjusted with the user sitting
in the wheelchair.
• Make sure the user is sitting as far back in the seat
as possible.
• Angle the back support so that the dynamic pelvic support
is activated (see illustration).
• Support the pelvis by tightening the dynamic pelvic
support belt. Remember that the belt is automatically
loosened when the back support is tilted back (see
illustration). With the Comfort back support cover, the
back support belt is
also height-adjustable.
• Then adjust the upper strap to provide the user with
upper body support and balance.
• The other straps are adjusted to provide space for the
user’s posterior and follow the back’s natural curvature.
Bear in mind the risk of tipping.
Always check the positioning of the anti-tips.
Seating comfort
Good seating comfort depends on the needs and
possibilities available to each individual. The following
general guidelines here show what to consider when
settings are made.
Dynamic pelvic support activated Dynamic pelvic support deactivated
Seating comfort settings
User manual
To Next Page
Loading...
