A
A
The push handle/bow handle, height-adjustable
Loosen the knob for the push handle lock (A). Install desired
height. Ensure that the push handle is in
a "snap lock" position, tighten the knob.
Make sure knobs are securely tightened.
This is especially important if the chair is
to be lifted with the user sitting in it.
Ensure that the push handle locking pin is always
secured under the push handle attachment.
Loosen - Push handle/bow handle
Loosen the knob for the push handle lock. Pull up the push handle until the locking pin engages in the track.
Insert a coin or a flat tool in the groove on the right side to unsnap the locking pin on the handle. Pull the push/pull
handle out of the attachment.
How to use
User manual
To Next Page
Loading...
