ETC Express 24/48 - Chapter 16 Effects

Express Two Scene Preset User Manual, v.3.1 183
Deleting submasters
After entering the submaster spreadsheet as explained above, delete a
submaster as follows.
Replacing channel level
As a convenient editing technique, you may specify a particular level to
change for a channel or number of channels. After entering the submaster
spreadsheet as explained on the previous page, replace channel level as
follows.
Keystrokes: Actions:
1. Press [S6], Delete Sub.
Prompt reads:
To delete submaster(s), select
number(s) and press ENTER
To cancel, press CLEAR
2. Press [5] [And] [6].
Selects submasters 5 and 6
Prompt reads:
To confirm, press ENTER
To cancel, press CLEAR
3. Press [Enter] [Enter].
Deletes submasters 5 and 6
Keystrokes: Actions:
1. Press [S1], Select Sub.
Prompt reads:
Select submaster(s)
2. Press [5] [Enter].
Selects submaster 5
Prompt reads:
Select channel(s)
3. Press [5] [Thru] [1][0] [S3],
Replace Level, [5][0].
Selects channels 5 through 10 at level
50 to change
Prompt reads:
Select level to replace and press
ENTER
4. Press [Enter].
Prompt reads:
Select new level and press ENTER
5. Press [Full] [Enter].
Changes all channels in the range 5
though 10 with level 50 to level full