ETC Express 24/48 - How to Enable; Disable Etclink Error Messages

266 Chapter 24 Dimmer monitoring
How to enable / disable ETCLink error messages
Keystrokes:
Action:
1. Press [Setup].
Selects Setup display
2. Press [9], ETCLink
Functions, [Enter].
Selects ETCLink Functions menu
3. Press [6], Display
Advisories, [Enter].
Prompt reads:
Enable/disable display of ETCLink
advisories
(1 = Enable all, 2 = Enable fatal error
advisories only, 0 = Disable)
4. Press [1] [Enter].
Enables all ETCLink error advisories