26 Chapter 3 System settings
Setting default sneak time
The sneak function allows you to fade or restore channel levels on
stage in a specified time.
The console allows you to assign a default Sneak time.
8
For more
information about the Sneak function, see page 58.
Follow these steps to set a new Sneak time:
8.
The factory-set default sneak time is five seconds.
Keystrokes:
Action:
1. Press [Setup].
Selects Setup display
2. Select [1], System
Settings, and press
[Enter].
Selects System Settings menu
3. Select [6], Default Sneak
Time, and press [Enter].
Prompt reads:
Enter default sneak time
4. Enter the time you wish to
assign as the Sneak time
and press [Enter].
Sets the new default Sneak time
To Next Page
Loading...
