306 Chapter 25 Control interfaces
Remote macros
The remote macro feature provides the ability to control up to 4 console
macros from locations up to 1,000 feet away. Typically the Remote Macro
control device is a four button control station.
The remote macro terminals on the console rear panel control macros
1,901 through 1,904. To operate one of these console macros from a
remote location, press the appropriate control.
ETC does not provide remote macro control units. However, the console
does provide a 15-pin connector labeled Remote Macro to which you may
attach a user-supplied, remote macro control device. See Installing
remote macros, page 324 for more information about connecting a
remote macro controller to your console.
Serial interface
Please disregard option 13, Serial Protocol Baud Rate, on the Options
Settings menu as well as the associated softkey in that menu, [S2], ESP
Baud Rate. Those choices are intended for the Express Lighting Playback
Controller which has a RS232 serial interface port that is reserved for
future implementation.
To Next Page
Loading...
