66 SmartFade v3.0.1 User Manual
General Information
To use the console as a two scene console, you have to start it in Two Scene Mode. See
“Operating Modes” on page 5.
You will no longer be able to access “normal” SmartFade functions as described in this
manual. It is now only a two scene presetting console.
In Two Scene Mode no memories are stored - everything is set manually and faded with
the Crossfaders.
Console Settings in Two Scene Mode
Console settings are more or less identical to Normal Mode. See “Console Settings” on
page 23.
These are some special settings for Two Scene Mode.
Default Time
Allows you to set a default time for all crossfades.
Menu>Settings>[Default Time]
Patch
Allows you to choose a 1:1 patch, or the Custom patch from Normal Mode. See “Clear/Set
Patch” on page 19.
Menu>[Patch]
To Next Page
Loading...
