ETS-Lindgren EMCenter - Download USB Drivers; If Your Computer Is Installed with Windows 7, 8, or 10

38
Remote Control of the EMCenter www.ets-lindgren.com
DOWNLOAD USB DRIVERS
The USB drivers are located at ets-lindgren.com.
1. On the Resources menu, click Software/Firmware.
2. In the Software column, click USB Virtual Comm Port Driver (the name
of the zip file may vary slightly). Save the zip file to the desired location
on your computer.
3. Extract the files from the downloaded zip file.
IF YOUR COMPUTER IS INSTALLED WITH WINDOWS 7, 8, OR 10
1. Follow the Download USB Drivers steps, above.
2. Plug the EMCenter or EMPower into a USB port on the computer.
3. Open the Device Manager.
4. Click Ports (COM & LPT).
5. Click the name of the USB device.
6. Click the Driver tab.
7. Click Update Driver to start the update driver software dialog box.
8. Click Browse my computer for driver software.
9. Click Browse, navigate to the location on your computer where you
extracted the files from the downloaded zip file, and then click the
location.
10. Click OK, and then click Next.
11. Click Closed.
12. Reboot the computer.