ETS-Lindgren EMCenter - Empower Plug-In Card and Empower Sensors

www.ets-lindgren.com Introduction
9
EMP OWER P LUG -I N C ARD AND EMP OWER S ENSORS
The EMPower Meter Plug-in Card occupies one slot in the EMCenter and
includes four USB ports, accommodating any combination of up to four EMPower
USB RF Power Sensors.
Two versions of the EMPower sensors are available:
 Model 7002-002 and Model 7002-004: Support RMS measurements
for CW signals.
 Model 7002-003 and Model 7002-005: Measure RF bursts as short as
a few microseconds.
The 7002-002 and 7002-003 sensors cover the 9 kHz to 6 GHz range, and the
7002-004 and 7002-005 sensors cover the 80 MHz to 18 GHz.