EUFY L50 - Cleaning and Maintenance

EN 07
In the eufy Clean app, select a suction power level according to your needs: Quiet, Standard (Default), Turbo, and
Max.
In the eufy Clean app, select the BoostIQ™ feature according to your needs. RoboVac will automatically increase
suction power if it detects that stronger power is needed to ensure the best clean. BoostIQ™ is ideal for cleaning
thicker carpets and hard-to-sweep messes, which will reduce the total cleaning time but increase the noise level. If
the vacuuming noise caused by BoostIQ™ disturbs you, you can disable this feature.
Prior to cleaning and maintaining, power off the device and unplug the power adapter. Any other servicing should
be performed by an authorized service representative.
For optimal performance, follow the instructions below to clean and maintain RoboVac regularly. The cleaning and
replacement frequency will depend on your RoboVac usage habits.
Amazon Alexa or the Google Assistant are smart voice control devices that enable you to control RoboVac with
your voice.
Select a Suction Power Level
Select BoostIQ™ Feature
Use RoboVac with Amazon Alexa / The Google Assistant
• When RoboVac starts cleaning next time, it will clean according to the suction power level you
previously selected.
Before you start, make sure:
• RoboVac is attached to the Charging Station to ensure there is enough power.
• RoboVac is connected with the eufy Clean app.
• You have an Amazon Alexa-enabled device (i.e. Amazon Echo, Echo Dot, Amazon Tap, Echo Show, or Echo Spot)
or a device enabled with the Google Assistant (i.e. Google Home, Google Home Mini). These devices are sold
separately.
• The Amazon Alexa app or Google Home app is already installed on your smart device, and you have created an
account.
To control RoboVac with Amazon Alexa or the Google Assistant:
In this mode, you can set up a cleaning zone and customize its size in the eufy Clean app, RoboVac will clean the
selected zone only.
In this mode, your house is automatically divided into several rooms for cleaning in the eufy Clean app. You can
also customize your room settings in the app. RoboVac will clean the selected rooms only and return to the
Charging Station after cleaning.
Zone Cleaning (Available on App only)
Room Cleaning (Available on App only)
• Enable Room Cleaning only after RoboVac has created the map.
• It is recommended that RoboVac moves from the Charging Station to start room cleaning.
• By default, RoboVac starts in Auto-cleaning Mode when it is turned on.
To pause cleaning, press again.
1
Open the eufy Clean app and find “Smart Integrations” in the top left.
2
Follow the on-screen instructions to complete the setup.
Cleaning and Maintenance