EN 08
Recommended Cleaning and Replacement Frequency
RoboVac Part Cleaning Frequency Replacement Frequency
Dust Box After each use -
Filter Once a week Every 3 months
Side Brush Once a month Every 3-6 months (or when visibly worn)
Brush Guard
Once a month Every 3-6 months (or when visibly worn)
Rolling Brush Once a week Every 6-12 months
Sensors Once a month -
Charging Pins Once a month -
Swivel Wheel Once a month -
1
Press the release buttons on both sides to detach the dust box from RoboVac.
2
Open the lid of the dust box.
3
Empty the dust box and shake it to get rid of the remains.
Clean the Dust Box and Filter