EUFY L50 - Clean the Rolling Brush

EN 09
4
Take out the filter and clean it with the cleaning tool.
5
Reinstall the dust box onto RoboVac.
Click
• When reinstalling the dust box, make sure you hear two clicks on both sides to confirm the dust
box has been fixed in place.
Clean the Rolling Brush
1
Turn over the main unit, push the release tabs with both hands to unlock the brush guard, as shown.
2
Take out the rolling brush. Clean the hair entangled on the rolling brush and debris with a scissor or cleaning
tool.
3
Use a cleaning tool to brush off the dust in the slot as well.