Eureka Manta 2 User Manual (English)

Need help?

Do you have a question about the Eureka Manta 2 and is the answer not in the manual?

Eureka Manta 2 Specifications

General

IP Rating	IP67
Display	LCD
Operating Temperature	0 to 50°C
Storage Temperature	-20 to 60°C
Calibration	Automatic, single point

Summary

QS Learning the Manta 2 in 30 Minutes

Initial Setup and Connection

Steps for loading software, installing drivers, and connecting the Manta 2 to a PC.

Connecting the Manta 2 to a PC

B Manta 2 Control User Interface

Connecting and Main Screen Overview

Connecting to PC and overview of the Manta 2 Control Software's main interface.

Software Navigation: Hot Buttons and Menus

Explains hot buttons and pull-down menus for software operation.

C User Interface: PC or Amphibian Menu

D User Interface: Manta 2 Pull-Down Menu

D3 Logging Set-Up

Configuration options for data logging parameters like interval and wipe cycles.

D6 Sensor Calibration and Settings

Detailed steps for calibrating sensors and setting pressure/time/date.

E Sensors and Calibrations

E3-E6: Calibration Record, SRF, Temperature, and Clark DO

E7 Optical Dissolved Oxygen Sensor

E8-E10: Conductivity, pH, and Reference Electrode

Explains conductivity, pH sensors, and reference electrode maintenance.

E11-E13: ORP, Depth, and Turbidity Sensors

Covers ORP, depth, and turbidity sensors, their operation, and calibration.

E14-E16: Specialized Sensors (Algae, ISEs, TDG)

G Logging Operations

Battery Power Management: Internal and External Packs

G8-G11: Power Sources, Telemetry, Data Dumping, and Maintenance

H Everything Else: Troubleshooting and Housing

H3 Performance Specifications

Technical specifications for Manta 2 parameters, range, accuracy, and resolution.

Eureka Manta 2 User Manual

Table of Contents