Euroscan MX1 - Appendix Atechnical Data

Euroscan MX1 18
Document number: EN-301-1:UD - based on Firmware version 1.033 and forward
APPENDIX A TECHNICAL DATA
Operating voltage
10 - 36 V, protected against alternator load shedding
Power consumption
(with iGPRS / GPS)
0,15 W (nominal), 2 W (maximum)
0,8 W (nominal), 12 W (maximum)
Temperature
-30°C / +70°C (in operation), -40°C / +85°C (maximum)
Humidity
97% relative humidity at 25°C
Memory size
512kB, minimum 1 year with 2 sensors and logging interval 15 min.
Inputs
6x temperature for Euroscan sensors: measuring range –40°C to
+50°C , or
6x humidity sensor, or a combination
1x digital for ignition, active > 5 V
4x digital, closed circuit, active > 5 V
Data ports
2x RS232 connectors for external devices
1x CAN connector for external device (optional)
Telematics
(optional, mounted inside MX1)
iGPRS communication, Quad band (worldwide coverage)
GPS positioning, built-in antenna (vertical / horizontal mounting slot)
Bluetooth, Class I ( >100 m communication range with ‘clear view’)
Ventilation
No special requirements. Euroscan products are designed for use in
automotive environments
IP rating
IP67
Dimensions (W x D x H)
200 x 145 x 55 millimeters
Cirquit protection
One 10 A floating fuse, fitted in the positive (+VE) power line, as
close as possible to the power connection (supplied in installation
kit)
Battery
The MX1 contains a lithium battery. This battery should be removed
before discarding and should be disposed separately.
For technical support, please contact your local supplier or Euroscan: visit www.euroscangroup.com.