EVBox Iqon - Delivered Components; Optional Components

3.5. Delivered components
1. Iqon charging station.
2. Bracket, 2x.
3. Baseplate, 50 mm (1.97 in).
4. Iqon documentation.
5. Key to open covers.
6. Protection shield.
7. Lifting shield.
8. Small components (screws, thumbnuts, cable
glands, 120 Ω resistor).
3.6. Optional components
Depending on the installation, the following components can also be required. Contact your supplier
to order the optional components.
Note: The installer is responsible for supplying the power cables, data cables and any minor items
required for the installation.
Component Part number
EVBox Dual Socket Test Box (to test the functioning of the charging station) 462323
3. Product features
EN
15