EVBox Iqon - 1 Introduction; Scope of the Document; Get in Touch; Symbols Used in this Manual

1. Introduction
Thank you for choosing EVBox Iqon. Built to be accessible and intelligent, EVBox Iqon is the ideal
charging station for every commercial location.
This Installation and Commissioning Manual tells you how to install EVBox Iqon and make it ready for
use. You must carefully read the safety information before you start.
1.1. Scope of the document
Keep this manual for the entire life cycle of the EVBox Iqon.
This manual is intended exclusively for qualified personnel who can assess the work and identify
potential danger.
This manual comprises two parts:
• Manual Part A - This part contains the instructions.
• Manual Part B - This part contains the illustrations for the instructions.
You must read both parts of the manual.
All EVBox manuals can be downloaded from www.evbox.com/manuals.
© 2020 EVBox Manufacturing B.V. - all rights reserved. No part of this document may be modified,
reproduced, processed, or distributed in any form or by any means, without the prior written
permission of EVBox.
1.2. Get in touch
If you have any suggestions how we can improve our products, or if you see an error, we’d love to hear
from you. You can contact us by going to www.evbox.com/support.
1.3. Symbols used in this manual
The following symbols may be used in this manual:
1. Introduction
EN
3