Evco EV3 MVC Applications Manual

EVCO S.p.A. EV3 MVC & EVD MVC | Application manual ver. 2.2c | Code 1443DMVCI224
page 19 of 74
On/stand-by:
- ON if the controller is switched off (stand-by)
- OFF if the controller is switched on
RUN (not available on EVD MVC):
- always on
---
Days of the week (screen printed on the front of the EVJ LCD):
- ON LED indicating the day of the week if the clock is enabled
- The LED flashes indicating the day to be amended in the quick menu for
setting time bands
Not used
Not used
Not used
4.3 LED EVD MVC
The table below describes the 5 EVD MVC signalling LEDs along the side.
LED Colour Description
ON GREEN
Hardware LED
on if the device is powered up.
RUN GREEN
RUN LED
- ON if the controller is switched on
- OFF if the controller is switched off (stand-by)
RED
Alarm LED
- ON if an alarm is in progress
- OFF if no alarm is in progress
IB AMBER
Intrabus LED
- FLASHING if communication in progress
- OFF if no communication in progress
RS-485 AMBER
Modbus LED
- FLASHING if communication in progress
- OFF if no communication in progress

Evco EV3 MVC Specifications

General

Brand	Evco
Model	EV3 MVC
Category	Controller
Language	English