Evco EV3 MVC Applications Manual

EVCO S.p.A. EV3 MVC & EVD MVC | Application manual ver. 2.2c | Code 1443DMVCI224
page 48 of 74
9 SERIAL PORTS
Controllers EV3 MVC and EVD MVC have the following serial ports:
- INTRABUS baud rate 19,200, even, 1 stop bit
proprietary communications protocol INTRABUS node 1 (MASTER)
- RS-485 baud rate from parameter C61 (default 9600)
even from parameter C62 (default even)
stop bit from parameter C63 (default 1)
MODBUS SLAVE communications protocol node from parameter C22 (default=1).
The MODBUS RS-485 serial port can be used to communicate with a supervision system or a personal computer.
The document “MODBUS IMPLEMENTATION TABLE” (document code 1463DMVC104) describes the resources of the devices accessible
via the RS-485 serial port. The document is available on the www.evco.it website.
The INTRABUS serial port enables a remote keypad (EVK3K11 or EVJ LCD) to be connected to the EV3 or the EVD MVC controller.

Evco EV3 MVC Specifications

General

Brand	Evco
Model	EV3 MVC
Category	Controller
Language	English