Evco EVD MVC Series Applications Manual

EVCO S.p.A. EV3 MVC & EVD MVC | Application manual ver. 2.2c | Code 1443DMVCI224
page 35 of 74
If a time band is disabled, the menu jumps directly to the next day type. Hence it is important to check that the
bands following the one that you wish to disable are also disabled.
6.2.3 Enabling time bands
This menu is accessed by a short press on the Up key on the home page. Press the SET key to change the existing setting and confirm
the change.
This menu enables time bands to be enabled or for holidays to be set. After having pressed SET, use the Up and Down keys to see the
following sequence of headings:
- OFF: enable manual mode
- On: enable time bands
- HoLi: pressing SET allows settings to be made relating to holidays (by pressing the SET key again existing values can be
amended and then confirmed):
- typ
- Hou: set a holiday of a number of hours
- dAy: set a holiday of a number of days
- day/Hou: set the number of holiday hours/days desired
- Mod
- HOFF: the machine is switched off during the holiday period
- H ON: the machine is switched on during the holiday period
- tHH: set the heating mode temperature setpoint, if the machine is switched on during the holiday
- tCH: set the cooling mode temperature setpoint, if the machine is switched on during the holiday
- FnH: set the fan speed setpoint if the machine is switched on during the holiday
- dMH: set the damper opening setpoint if the machine is switched on during the holiday

Evco EVD MVC Series Specifications

General

Brand	Evco
Model	EVD MVC Series
Category	Controller
Language	English