Setting Up Your New System
The Setup Screen
The Setup Screen of the EvenCare G2 Meter lets you take advantage
of the advance functions of this meter. Simply use
▲▼
buttons to
navigate to the desired function icon, and press the Enter ( ) button
to enter the function when the icon is flashing. Navigate to End at the
display screen to exit the Setup Screen. The Meter will also announce
each function when the voice feature is on.
..........Press
Enter ( ) to enter Memory Recall to retrieve stored re-
sults. Your meter can memorize up to 300 memories with
date and time. (see page 39)
..........Press Enter ( ) to enter PC Link Mode for data transfer
onto a PC*
*This function is not available yet.
..........Press Enter ( ) to enter Time and Date Setup
(see page 13).
..........Press Enter ( ) to enter Alarm Setup (see page 16).
Your meter can have as many as 3 alarm settings.
To Next Page
Loading...
