EasyManua.ls Logo

EvenCare G2 - Cleaning the Meter; Storage and Precautions

EvenCare G2
98 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cleaning the Meter
If the meter gets dirty, use a moist (NOT WET) lint-free cloth
dampened with a mild detergent.
Do not get water inside the meter or hold it under running water.
Do not use glass or household cleaners on the meter.
Do not try to clean the test strip holder.
Storage and Precautions
Handle the Meter with care- severe shock, such as dropping the
meter, could damage the electronics.
The meter and test strips are designed to be used within the
temperature ranges between 50˚F to 104˚F.
Avoid leaving the meter in extremely hot or cold place, such as near
a heat source or in an extremely hot or cold car.
Do not store or use the meter or test strips in high humidity levels,
such as bathroom or kitchen.
Always close bottle cap immediately after removing a test strip and
make sure it’s closed tightly.
Do not take the meter apart as doing so will void the warranty. If
there are technical problems or questions, please call Medline’s
Technical Service Center at 1-866-274-2131 Monday through Friday
between 8:00 a.m. and 5:00 p.m.(Central Time). Contact your
Healthcare Provider at all other times.
EvenCareG2
Table of Contents
45
Caring for the Meter

Other manuals for EvenCare G2