WHEN the meter will speak… WHAT the meter will say…
EvenCareG2
Voice Function Table
23
During date and time setup,
setting up the Minutes
After finishing setting up date
and time
Setting alarm 1, 2, or 3
When sending data to PC
*This function is not available yet.
Finish sending data to PC
*This function is not available yet.
“Set Minutes”
“The date and time is (year)
(month) (date) (hour) (minutes)”
“Set Alarm (number)”
“Sending data to PC”
“Data transmission complete”
To Next Page
Loading...
