To Next PageTo Next Page
Need help?Do you have a question about the Everbilt CSP010 and is the answer not in the manual?
General| Brand | Everbilt |
|---|---|
| Model | CSP010 |
| Category | Water Pump |
| Language | English |
Warnings against flammable liquids, grounding, and proper 3-prong plug usage for safe operation.
Disconnect power before servicing, release pressure, secure discharge lines, and protect power cords.
Ensure circuit protection (10A fuse/breaker) and always wear safety goggles during operation.
Use for condensate removal only; not for pools, salt-water, or continuous fountain/waterfall operation.
Details minimum operating depth, power supply, temperature range, and discharge size.
Lists required tools such as screwdrivers and safety goggles, plus pump and tubing package contents.
Mount the unit level on a side surface or wall, ensuring the inlet is below the coil drain.
Securely connect tubing to intake and discharge ports, ensuring proper angles and an air gap.
Connect the pump power cord into a properly grounded 115-volt power outlet.
Details how the safety switch activates an alarm or cuts power in high water conditions.
Procedure to test pump activation, water discharge, and safety switch reset.
Addresses blown fuses, tripped breakers, disconnected plugs, corroded plugs, stuck floats, or open circuits.
Covers kinked tubing, long tubing runs, stuck floats, excessive discharge height, or obstructions.
Diagnoses issues with liquid draining back or leaking around the check valve.
Relates AC performance to potential blockages or safety switch activation in the condensate pump.
