4 For Professional Technical Support call 1-844-241-5521
Pre-Operation
APPLICATION
This non-submersible utility pump is designed for condensate removal applications. Pump water only with this pump.
This pump has not been tested or approved for use in swimming pools or in salt-water marine areas. This pump is not designed to
function as a permanently installed sump pump. It is also not engineered to run continuously as a “fountain” or “waterfall” pump.
Do not use where water recirculates.
Not designed for the drains of swimming pools.
FEATURES
Operating water depth: minimum, 2-1/4 in.
TOOLS REQUIRED
PACKAGE CONTENTS
Part Description
A Pump
B 3/8 in.(ID)clear tubing
SPECIFICATIONS
Power supply 115V, 60 HZ., 10 Amp Circuit
Liquid Temp. Range
32°F to 95°F(0°-35°C)
Discharge 3/8 in. hose barb
Safety Goggles
Phillips
Screwdriver
Flathead
Screwdriver
To Next Page
Loading...
