EasyManua.ls Logo

Everbilt EFSUB5-122HD - User Manual

Everbilt EFSUB5-122HD
32 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
THANK YOU
We appreciate t
he trust and confidence you have placed in Everbilt through the purchase of this pump. We strive to continually create quality
products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for
choosing Everbilt!
Item #100
1 092 349,
1001 092 255, 1001 092 261,
1001 092 264, 1001 092 483,
1001 092 258, 1001 092 273
Model #EFSUB5-122HD,
EFSUB5-123HD, EFSUB7-122HD,
EFSUB7-123HD, EFSUB10-122HD,
EFSUB10-123HD, EFSUB10-253HD
USE AND CARE GUIDE
4 IN. SUBMERSIBLE PUMP
(TWO AND THREE WIRE, ½ - 1HP, 60 HZ)
Questions, problems, missing parts? Before returning to the store,
call Everbilt Customer Service
8 a.m. - 6 p.m., EST, Monday-Friday
1-844-883-1872
HOMEDEPOT.COM

Table of Contents

Questions and Answers

  • B
    Brianna HudsonAug 11, 2025
    How to fix air or milky water discharge from Everbilt EFSUB5-122HD Water Pump?
    • S
      stephenmillerAug 11, 2025
      If you notice air or milky water discharging from the faucet when using your Everbilt Water Pump, it could be due to gas in the well water. Check for the presence of gas and consider removing bleeder orifices and plugging tees, ensuring the plugged tees do not leak. If necessary, separate the gas from the water before it enters the pressure tank. Another potential cause is a malfunctioning air volume control. Make sure the ports and ball check valves are clear. If the air volume control is not working, consider replacing it.
  • J
    Jordan JohnsonNov 19, 2025
    Why does my Everbilt Water Pump start too frequently?
    • A
      Andrea WilliamsNov 19, 2025
      If your Everbilt Water Pump starts too frequently, several factors could be the cause. There might be leaks in the system; check all tank connections with soapsuds for air leaks and inspect the plumbing for leaks, ensuring the system is airtight. The pressure switch could be defective or out of adjustment, requiring readjustment or replacement. A waterlogged tank could also be the culprit; check the tank's pre-charge air pressure and for bladder leaks, adjusting the air pressure to 2 PSI less than the pump cut-in pressure or replacing the bladder if needed. For air over water tanks, check for air leaks, the Air Volume Control (AVC), and snifter valve operation, repairing or replacing components as necessary. A leak in the drop pipe can also cause frequent starts; raise the drop pipe one le...
  • L
    Lonnie Rodriguez MDDec 1, 2025
    What to do if my Everbilt EFSUB5-122HD Water Pump is delivering little or no water?
    • M
      Michael WilliamsDec 1, 2025
      If your Everbilt Water Pump delivers little or no water, several issues could be responsible. Start by examining the bleeder orifice check valve to ensure it is not stuck or installed backward; free it if stuck, or reverse it if incorrectly installed. Check the water level in the well while the pump is running and compare it to the pump depth setting; lower the pump further into the well, ensuring it remains at least 5 ft. above the well bottom, and throttle the pump discharge to match the well's recovery rate. Low voltage can also cause this issue; check the voltage at the control box with the pump running, verify the incoming wire size and power supply wire size against the manual's wiring tables, and install larger wires if needed, or have the power company raise the supply voltage. A p...

Everbilt EFSUB5-122HD Specifications

General IconGeneral
ModelEFSUB5-122HD
CategoryWater Pump
TypeSubmersible
Horsepower1/2 HP
Voltage115V
Maximum Head25 ft
Cord Length10 ft
Thermal ProtectionYes
SubmersibleYes
Discharge Size1-1/2 in.
Switch TypeVertical Float Switch

Related product manuals