Everbilt LTS250A - Pre-Installation

4 For Professional Technical Support call 1-844-241-5521
Pre-Installation
APPLICATION
This pump is designed to be used with a sink where a gravity drain line is not available. Attach the pump to the drain tail piece; the pump
will start when water begins to drain. Uses include basement laundry sinks, wet bars and utility sinks.
TOOLS REQUIRED
PACKAGE CONTENTS
NOTE: The adaptor is not shown to scale.
Part Description
A Pump
B Ball valve
C Check valve
D Strainer
Phillips
Screwdriver
Flathead
Screwdriver
Hand
Hacksaw or
PVC Cutter
Safety Goggles
Tape Measure
Thread Tape
Wrench