SPEED: Select the speed for the preset position. The value is from 1 to 255 and 255 is
the highest speed.
DWELL TIME (S): Select the dwell time (in second) for the preset position from 1 to 99.
FOCUS MODE: Select focus mode for the preset position from MANUAL, ONE PUSH and
AUTO.
WHITE BALANCE: Select the white balance for the preset position from Auto, Indoor and
outdoor.
TITLE: Enter title name for the preset position. Tilt the joystick up and down to scroll
through the characters, then tilt left or right to move to the previous/next position. When
finished, move the last digit and tilt the joystick right to return to previous screen.
DEFAULT: Select ON to set the preset position to default value.
FREEZE PICTURE: Image will stop at the previous position until the next position is
reached.
ON: freeze picture
OFF: disable freeze picture function.
EXIT: Select Exit to save settings and exit from current page.
To Next Page
Loading...
